Another jig that is widely available at woodworking suppliers is the featherboard or variations on the featherboard, designed to be used with a table saw or router table to hold the stock securely against the cutting head or blade. Not only does the featherboard hold the board securely, ensuring that cuts and beads are straight and true, but it serves as a safety mechanism to help prevent kickback.


Listened to other reviewer's modifications to make it better and wow, it is doing exactly what I wanted. Modification 1: Add 8 x M6 lock washers to the cross sections on both legs. This will significantly add to stability. Modification 2: Throw away the pins used to keep the roller knobs on and replace with two 8-32 x 1-1/4 inch machine screws and 8-32 nylon insert lock nuts. That will make the putting the knobs on very easy and just as easy to get back off. Total cost for mods from Home Depot: $2.
While some people consider the circular saw to be more of a carpentry tool than a fine woodworking tool, but some would disagree. There may be no more versatile basic handheld power tool than a circular saw. When used with a clamp-on straight-edge, the circular saw can be just about as accurate as a table saw and handle quite a few of the tasks that one would attempt with a table saw, particularly cutting sheet goods such as plywood or medium-density fiberboard. When woodworking on a budget, a quality circular saw should be the first handheld power tool purchased, as it is the one that will likely be the most useful as you get started.

Listened to other reviewer's modifications to make it better and wow, it is doing exactly what I wanted. Modification 1: Add 8 x M6 lock washers to the cross sections on both legs. This will significantly add to stability. Modification 2: Throw away the pins used to keep the roller knobs on and replace with two 8-32 x 1-1/4 inch machine screws and 8-32 nylon insert lock nuts. That will make the putting the knobs on very easy and just as easy to get back off. Total cost for mods from Home Depot: $2.

In most situations, you can take the dust bag off of the port and hook up a shop vac or an industrial dust-collection system. Many table saws make use of a standard-size dust port between 2-1/2 and 4 inches in diameter, which means it may be compatible with equipment that you already own. Some models forgo the dust bag altogether, in the expectation that you’ll be using some sort of dust collection system.
This Black and Decker Jigsaw has proved that if the motor is efficient enough, it can deliver high speeds up to 3,000 SPM even when it has low amps. Yes, our 4th pick for the list BLACK + DECKER BDEJS300C Jigsaw only has a 4.5-amp motor but it is able to deliver speeds as high as 3,000 on the optimal settings making this an ideal and affordable item.
A few initial notes are in order. If buying a contractor saw, I would consider Delta and Jet offerings by that same name. If my work and budget called for a cabinet saw, I would consider the Jet Xacta, Powermatic 66, and Delta Unisaw. Test-drive candidate saws; a few cuts mean more than a month of junk mail. Durability and fence quality are generally not factors. Either saw type will last outlast its owner with reasonable care, and either can be bought with a high quality fence. I would not consider anything less than the contractor saws mentioned above. Cheaper saws make rough cuts, wear out quickly, don't hold their adjustments, and are more prone to dangerous kickbacks. The good taste of money saved turns bitter when your projects take longer and turn out poorly. My intent is to state differences in a non-biased manner, but an attempt has been made to order the items by probable importance.
This heavy-duty Combination Machine joints and planes using This heavy-duty Combination Machine joints and planes using the same 12 in. cutterhead saving money and the space required for 2 individual machines. Conversion from the jointer to the planer is easy. Just remove the quick-release fence and flip up the jointer tables. The tables are precision-ground to a mirror-like ...  More + Product Details Close
Whilst I agree with everything you say there has to be a but 😀 and here it comes, after promising myself I’d have the bench of my dreams since my apprenticeship 42 years ago I finally two years ago built a three quarter ton steamed beech monster with all the bells and whistles. If only I’d had it years ago to me it’s the most important tool in my workshop now ! Solid, heavy, side and head vice, dog holes everywhere, sliding deadman the lot and yes very very pretty. But built to be used as a bench and with some visiting clients a showpiece! But more than anything because I could

This Combination Machine is similar to the G0634Z This Combination Machine is similar to the G0634Z except it sports our popular Polar Bear colors. It also has an end-mounted fence so you can work as close to your shop wall as possible. This feature is a real space saver and since this is a combination machine you're saving ...  More + Product Details Close
×